Nightfood Holdings Acquires CoWoS's Automatic Optical Inspection Technology, with Initial Shipping Targeted for the Fourth Quarter of 2026
GlobeNewswire
1h ago
Ai Focus
Nightfood Holdings Announces Acquisition of AOI Technology for Advanced Semiconductor Packaging of CoWoS, Plans to License It to Its Fully-Owned Subsidiary TechForce Advanced Manufacturing The company stated that the initial sales and delivery targets are set for the end of November or early December 2026, subject to the preparation of the new factory in Taiwan, customer requirements, and compliance with regulatory regulations.
Helpful
No.Help

Los Angeles, October 22, 2026 ( GLOBE NEWSWIRE ) – Through IBN – Nightfood Holdings , Inc . ( OTCQB : NGTFD , hereinafter referred to as “ Nightfood ” or “the Company”) , which operates under the name of TechForce Robotics , today announces the acquisition of specific technologies, designs, and proprietary knowledge related to automated optical inspection ( automated optical inspection , hereinafter referred to as “ AOI ”) equipment for advanced semiconductor packaging on chip packaging substrates ( chip-on-wafer-on-substrate , abbreviated as “ CoWoS ”). This acquisition comes from Jun Long Machine Industrial Co in Taichung City, Taiwan, Ltd ., and was completed on October 19, 2026.

Nightfood will grant an exclusive license for the acquired technology to its wholly-owned subsidiary TechForce Advanced Manufacturing Inc (“TAMI”), which plans to manufacture and sell devices that incorporate this technology.

Commercialization Plan

The company's current commercialization goals include:

  • Initial sales and shipments are expected to begin at the end of November or early December 2026, provided that a planned manufacturing facility of 20,000 square feet located in Taiwan is ready for production, and at the same time, it must meet customer requirements and applicable regulatory compliance standards.
  • The initial production rate is about 10 to 15 units per month; assuming all of these devices are sold and delivered, with an average selling price of approximately $150,000 per unit, the monthly sales revenue would be around $1.5 million to $2.25 million. The pricing assumptions made by management reflect their judgment of the current market prices for similar devices.
  • Subsequently, it will be gradually increased to about 30 units per month, but this depends on customer demand, financing, factory readiness, staffing, and the supply of parts.

The company stated that these figures are merely management targets for operations and do not represent confirmed orders or guaranteed revenues. Actual sales will depend on product configuration, negotiated prices, customer orders, delivery schedules, and any applicable installation or acceptance requirements. Revenues will be recognized in accordance with generally accepted accounting principles in the United States. The monthly sales targets do not constitute forecasts for the first incomplete shipment month.

Nightfood Holdings CEO Jimmy Chan stated: "We believe that supporting the advanced packaging requirements of AI chips creates opportunities for testing equipment that can meet the ever-changing manufacturing demands. This acquisition provides us with the foundation in design and technical expertise to seize this opportunity. Our current focus is on preparing for production, securing customer orders, and delivering the first batch of equipment."

Regarding Nightfood Holdings, Inc. (Operated under the name of TechForce Robotics)

Nightfood Holdings, Inc. Operating under the name of TechForce Robotics, it is an advanced robotics and automation company dedicated to providing intelligent, scalable solutions for industrial and commercial applications. The company integrates robotics, artificial intelligence, and software-driven systems to optimize operations, improve efficiency, and drive the next generation of automation.

TechForce Robotics collaborates with various institutions to design and deploy customized robotic solutions to meet the ever-changing operational needs.

Learn more: www.techforcerobotics.com

About TechForce Advanced Manufacturing

TechForce Advanced Manufacturing, Inc is a company based in Nevada, dedicated to the development, manufacturing, commercialization, installation, and support of semiconductor automation and testing systems. Its initial focus was on expanding the production of wafer sorters and AOI equipment to serve wafer-based semiconductors and advanced packaging applications related to CoWoS. At the same time, the company is also exploring future applications that will support emerging Chip-on-Panel-on-Substrate ("CoPoS") manufacturing processes.

Forward-looking Statements

The matters discussed in this press release include forward-looking statements as defined by the Private Securities Litigation Reform Act of 1995. In this press release, terms such as “anticipate”, “believe”, “estimate”, “may”, “intend”, “expect”, “will”, and similar expressions are used to identify such forward-looking statements. Actual results, performance, or achievements may differ significantly from those expressed, implied, or anticipated in these forward-looking statements. These forward-looking statements are based primarily on the company's expectations and are subject to various risks and uncertainties, and actual results may vary greatly. Except as required by law, the company has no obligation to update or revise any forward-looking statements, whether due to new information, future events, or other reasons. Investors are advised to refer to the company's filings with the U.S. Securities and Exchange Commission for additional information.

Readers should not place excessive reliance on these forward-looking statements, which are only valid as of the date of this press release. Except as required by applicable laws, the company assumes no obligation to update or revise any forward-looking statements due to new information, future events, or other reasons.

Investor Relations, Media Relations, and Corporate Communications

Investor Relations: ir @ nightfoodholdings.com

Media Relations: media @ nightfoodholdings.com

Corporate Communications: IBN.Ai

Austin, Texas, United States

www.IBN.Ai

Telephone: 512.354.7000

Edit: Editor @ IBN.Ai

Tip
$0
Like
0
Save
0
Views 27
WalletJYS reminds readers to view blockchain rationally, stay aware of risks, and beware of virtual token issuance and speculation. All content on this site represents market information or related viewpoints only and does not constitute any form of investment advice. If you find sensitive content, please click“Report”,and we will handle it promptly。
Submit
Comment 0
Hot
Latest
No comments yet. Be the first!
Related
Bitcoin Approaches $81,500 Support Level, Bearish Momentum Strengthens: What Will Come Next for BTC
Bitcoin has seen increased volatility recently, with prices falling to 81,880 dollars before approaching the key support level of 81,500 dollars. The article suggests that if this area is lost, prices could drop to 76,600 dollars; however, if they manage to rebound above 89,000 dollars again, it would help strengthen the bullish momentum and point towards 100,000 dollars once more. The unstable capital flow of ETF also makes this round of recovery seem fragile.
Coinpedia
·2026-10-22 21:54:05
3
Nirva Raises $33 Million to Launch Pendants That Only Listen to Their Wearers
Ambient AI is experiencing a boom. Following Amazon, Plaud, Ambi founded by former executives of Amazon and Apple, startup Nirva has also joined the competition by launching a jewelry pendant that is designed to listen solely to the wearer. The company announced that it has secured $25 million in pre - Series A financing. Together with the $8 million in financing at the beginning of the year, the total financing amount reaches $33 million.
TechCrunch
·2026-10-22 21:44:43
12
BRC Group Holdings to Release Q3 2026 Financial Reports on November 5
BRC Group Holdings, Inc. It is indicated that the third-quarter financial report for the period ending September 30, 2026, will be released after the close of U.S. markets on November 5, 2026. On that day, the company's management will hold a teleconference at 4:30 p.m. Eastern Time to discuss financial performance and operational highlights, and to answer questions from analysts and investors.
PR Newswire
·2026-10-22 21:44:35
11
ELEGOO is about to launch M1 Ultra, enabling more creators to access professional-level 3D scanning capabilities.
ELEGOO indicates that it will officially launch its first all-in-one intelligent 3D scanner, M1 Ultra, on October 29, 2026, thereby expanding its product ecosystem into the field of 3D digitization. The company claims that this product combines blue laser and infrared structured light scanning, point-free scanning, a built-in touch screen, wireless connectivity, and a replaceable battery, and will be showcased for the first time in Maker Faire Rome 2026 and SPIEL Essen 2026.
PR Newswire
·2026-10-22 21:35:33
11
sonnen and USA Achieve Significant Growth; Plans to Expand Business in the U.S. After Merger
sonnen USA indicates that after being acquired by TIVEN, the company continued to advance its business expansion in the United States. The company stated that over the past year, with the support of collaborations with SOLRITE and others, it achieved record growth, doubling its sales volume and tripling its production year-on-year. It is expected that by 2026, the delivery volume of residential energy storage alone will exceed 180 MWh.
GlobeNewswire
·2026-10-22 21:35:31
14
View More